Package com.google.protobuf

Class DescriptorProtos.SourceCodeInfo.Location.Builder

java.lang.Object
com.google.protobuf.AbstractMessageLite.Builder<BuilderType>
com.google.protobuf.AbstractMessage.Builder<BuilderType>
com.google.protobuf.GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>
com.google.protobuf.DescriptorProtos.SourceCodeInfo.Location.Builder
All Implemented Interfaces:
DescriptorProtos.SourceCodeInfo.LocationOrBuilder, Message.Builder, MessageLite.Builder, MessageLiteOrBuilder, MessageOrBuilder, Cloneable
Enclosing class:
DescriptorProtos.SourceCodeInfo.Location
public static final class DescriptorProtos.SourceCodeInfo.Location.Builder extends GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder> implements DescriptorProtos.SourceCodeInfo.LocationOrBuilder
Protobuf type google.protobuf.SourceCodeInfo.Location

  • Method Details

    • getDescriptor

      public static final Descriptors.Descriptor getDescriptor()

    • internalGetFieldAccessorTable

      protected GeneratedMessage.FieldAccessorTable internalGetFieldAccessorTable()
      Description copied from class: GeneratedMessage.Builder
      Get the FieldAccessorTable for this type. We can't have the message class pass this in to the constructor because of bootstrapping trouble with DescriptorProtos.
      Specified by:
      internalGetFieldAccessorTable in class GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

    • clear

      public DescriptorProtos.SourceCodeInfo.Location.Builder clear()
      Description copied from class: GeneratedMessage.Builder
      Called by the initialization and clear code paths to allow subclasses to reset any of their builtin fields back to the initial values.
      Specified by:
      clear in interface Message.Builder
      Specified by:
      clear in interface MessageLite.Builder
      Overrides:
      clear in class GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

    • clone

      public DescriptorProtos.SourceCodeInfo.Location.Builder clone()
      Description copied from interface: MessageLite.Builder
      Clones the Builder.
      Specified by:
      clone in interface Message.Builder
      Specified by:
      clone in interface MessageLite.Builder
      Overrides:
      clone in class GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>
      See Also:

    • getDescriptorForType

      public Descriptors.Descriptor getDescriptorForType()
      Description copied from interface: Message.Builder
      Get the message's type's descriptor. See MessageOrBuilder.getDescriptorForType().
      Specified by:
      getDescriptorForType in interface Message.Builder
      Specified by:
      getDescriptorForType in interface MessageOrBuilder
      Overrides:
      getDescriptorForType in class GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

    • getDefaultInstanceForType

      public DescriptorProtos.SourceCodeInfo.Location getDefaultInstanceForType()
      Description copied from interface: MessageLiteOrBuilder
      Get an instance of the type with no fields set. Because no fields are set, all getters for singular fields will return default values and repeated fields will appear empty. This may or may not be a singleton. This differs from the getDefaultInstance() method of generated message classes in that this method is an abstract method of the MessageLite interface whereas getDefaultInstance() is a static method of a specific class. They return the same thing.
      Specified by:
      getDefaultInstanceForType in interface MessageLiteOrBuilder
      Specified by:
      getDefaultInstanceForType in interface MessageOrBuilder

    • build

      public DescriptorProtos.SourceCodeInfo.Location build()
      Description copied from interface: MessageLite.Builder
      Constructs the message based on the state of the Builder. Subsequent changes to the Builder will not affect the returned message.
      Specified by:
      build in interface Message.Builder
      Specified by:
      build in interface MessageLite.Builder

    • buildPartial

      public DescriptorProtos.SourceCodeInfo.Location buildPartial()
      Description copied from interface: MessageLite.Builder
      Like MessageLite.Builder.build(), but does not throw an exception if the message is missing required fields. Instead, a partial message is returned. Subsequent changes to the Builder will not affect the returned message.
      Specified by:
      buildPartial in interface Message.Builder
      Specified by:
      buildPartial in interface MessageLite.Builder

    • mergeFrom

      public DescriptorProtos.SourceCodeInfo.Location.Builder mergeFrom(Message other)
      Description copied from interface: Message.Builder
      Merge other into the message being built. other must have the exact same type as this (i.e. getDescriptorForType() == other.getDescriptorForType()). Merging occurs as follows. For each field:
      * For singular primitive fields, if the field is set in other, then other's value overwrites the value in this message.
      * For singular message fields, if the field is set in other, it is merged into the corresponding sub-message of this message using the same merging rules.
      * For repeated fields, the elements in other are concatenated with the elements in this message. This is equivalent to the Message::MergeFrom method in C++.
      Specified by:
      mergeFrom in interface Message.Builder
      Overrides:
      mergeFrom in class AbstractMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

    • mergeFrom

      public DescriptorProtos.SourceCodeInfo.Location.Builder mergeFrom(DescriptorProtos.SourceCodeInfo.Location other)

    • isInitialized

      public final boolean isInitialized()
      Description copied from interface: MessageLiteOrBuilder
      Returns true if all required fields in the message and all embedded messages are set, false otherwise.

      See also: MessageOrBuilder.getInitializationErrorString()

      Specified by:
      isInitialized in interface MessageLiteOrBuilder
      Overrides:
      isInitialized in class GeneratedMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

    • mergeFrom

      public DescriptorProtos.SourceCodeInfo.Location.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry) throws IOException
      Description copied from interface: MessageLite.Builder
      Like MessageLite.Builder.mergeFrom(CodedInputStream), but also parses extensions. The extensions that you want to be able to parse must be registered in extensionRegistry. Extensions not in the registry will be treated as unknown fields.
      Specified by:
      mergeFrom in interface Message.Builder
      Specified by:
      mergeFrom in interface MessageLite.Builder
      Overrides:
      mergeFrom in class AbstractMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>
      Throws:
      IOException

    • getPathList

      public List<Integer> getPathList()
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
      Specified by:
      getPathList in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getPathCount

      public int getPathCount()
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
      Specified by:
      getPathCount in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getPath

      public int getPath(int index)
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
      Specified by:
      getPath in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • setPath

      public DescriptorProtos.SourceCodeInfo.Location.Builder setPath(int index, int value)
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).

    • addPath

      public DescriptorProtos.SourceCodeInfo.Location.Builder addPath(int value)
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).

    • addAllPath

      public DescriptorProtos.SourceCodeInfo.Location.Builder addAllPath(Iterable<? extends Integer> values)
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).

    • clearPath

      public DescriptorProtos.SourceCodeInfo.Location.Builder clearPath()
      repeated int32 path = 1 [packed = true]; 
       Identifies which part of the FileDescriptorProto was defined at this
 location.
 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition.  For
 example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;
 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).

    • getSpanList

      public List<Integer> getSpanList()
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
      Specified by:
      getSpanList in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getSpanCount

      public int getSpanCount()
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
      Specified by:
      getSpanCount in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getSpan

      public int getSpan(int index)
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
      Specified by:
      getSpan in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • setSpan

      public DescriptorProtos.SourceCodeInfo.Location.Builder setSpan(int index, int value)
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.

    • addSpan

      public DescriptorProtos.SourceCodeInfo.Location.Builder addSpan(int value)
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.

    • addAllSpan

      public DescriptorProtos.SourceCodeInfo.Location.Builder addAllSpan(Iterable<? extends Integer> values)
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.

    • clearSpan

      public DescriptorProtos.SourceCodeInfo.Location.Builder clearSpan()
      repeated int32 span = 2 [packed = true]; 
       Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.

    • hasLeadingComments

      public boolean hasLeadingComments()
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;
      Specified by:
      hasLeadingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getLeadingComments

      public String getLeadingComments()
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;
      Specified by:
      getLeadingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getLeadingCommentsBytes

      public ByteString getLeadingCommentsBytes()
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;
      Specified by:
      getLeadingCommentsBytes in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • setLeadingComments

      public DescriptorProtos.SourceCodeInfo.Location.Builder setLeadingComments(String value)
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

    • clearLeadingComments

      public DescriptorProtos.SourceCodeInfo.Location.Builder clearLeadingComments()
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

    • setLeadingCommentsBytes

      public DescriptorProtos.SourceCodeInfo.Location.Builder setLeadingCommentsBytes(ByteString value)
      optional string leading_comments = 3; 
       If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.
 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.
 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.
 Examples:
   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;
   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.
   // Comment attached to qux.
   //
   // Another line attached to qux.
   optional double qux = 4;
   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

    • hasTrailingComments

      public boolean hasTrailingComments()
      optional string trailing_comments = 4;
      Specified by:
      hasTrailingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getTrailingComments

      public String getTrailingComments()
      optional string trailing_comments = 4;
      Specified by:
      getTrailingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • getTrailingCommentsBytes

      public ByteString getTrailingCommentsBytes()
      optional string trailing_comments = 4;
      Specified by:
      getTrailingCommentsBytes in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder

    • setTrailingComments

      public DescriptorProtos.SourceCodeInfo.Location.Builder setTrailingComments(String value)
      optional string trailing_comments = 4;

    • clearTrailingComments

      public DescriptorProtos.SourceCodeInfo.Location.Builder clearTrailingComments()
      optional string trailing_comments = 4;

    • setTrailingCommentsBytes

      public DescriptorProtos.SourceCodeInfo.Location.Builder setTrailingCommentsBytes(ByteString value)
      optional string trailing_comments = 4;