Short: HD installs Odyssey demo 1.1C Architecture: m68k-amigaos *** Finally its here !!! *** >>> This is the Install-Disk to make an 'Odyssey' File for your HD ! With this Disk you can: - Upgrade Odyssey Version 1.0 to 1.1C (which works on ALL Amigas with 1 MB) [To do this there are 5 Warp Files to Patch the 5 Disks... If you have already the Version 1.1C then you can forget this :) ] - Make a File from Odyssey so you can put it and run it from your HD !!! Please note that you need MORE than 1MB to run Odyssey from a HD. The File needs about 3.8MB on your HD... Of course you must have the 5 Disks Odyssey Demo to create this File ;))) YOU HAVE TO KNOW THAT THE DEMO WONT BE FASTER IF YOU RUN IT FROM A HARDDISK !!! You can start this Disk from the CLI (Startup-Sequence) or from WorkBench (Yes, there are Icons :). Works with OS2.0. Please follow the Instructions very carefully !!! To Patch the 5 Disks (-> Version 1.1C) you have to press F1-F5 (This will execute a little Batch to UnWarp the Files on the Disks...) and to create the 'Odyssey' File you must press F6 and follow the Instructions... This Install Version of Odyssey was tested on a A3000 PAL and ran fine. It should run on a 68040 too, but we couldn't test it till now... Hope you will enjoy this HD Version of Odyssey ! Thanx to my friend HORNET/ATZ for this Disk. Watch out for new Productions from ALCATRAZ and ZENITH !!! :) 'ALFred' - DOCTOR PSI / ZENITH REM : If you have any troubles with this Install Disk then PLEASE contact me at BASSAL@ELDE1.EPFL.CH (Email) or post it in NEWS (comp.sys.amiga.demos) or try to catch me on IRC. Thanx.